Verification of image quality and quantification in whole-body positron emission tomography with continuous bed motion

Abstract

Objective

Whole-body dynamic imaging using positron emission tomography (PET) facilitates the quantification of tracer kinetics. It is potentially valuable for the differential diagnosis of tumors and for the evaluation of therapeutic efficacy. In whole-body dynamic PET with continuous bed motion (CBM) (WBDCBM-PET), the pass number and bed velocity are key considerations. In the present study, we aimed to investigate the effect of a combination of pass number and bed velocity on the quantitative accuracy and quality of WBDCBM-PET images.

Methods

In this study, WBDCBM-PET imaging was performed at a body phantom using seven bed velocity settings in combination with pass numbers. The resulting image quality was evaluated. For comparing different acquisition settings, the dynamic index (DI) was obtained using the following formula: [P/S], where P represents the pass number, and S represents the bed velocity (mm/s). The following physical parameters were evaluated: noise equivalent count at phantom (NEC_phantom), percent background variability (N_10 mm), percent contrast of the 10 mm hot sphere (Q_{H, 10 mm}), the Q_{H, 10 mm}/N_10 mm ratio, and the maximum standardized uptake value (SUV_max). Furthermore, visual evaluation was performed.

Results

The NEC_phantom was equivalent for the same DI settings regardless of the bed velocity. The N_10 mm exhibited an inverse correlation (r < − 0.89) with the DI. Q_H,10 mm was not affected by DI, and a correlation between Q_H,10 mm/N_10 mm ratio and DI was found at all the velocities (r > 0.93). The SUV_max of the spheres was not influenced by the DI. The coefficient of variations caused by bed velocity decreased in larger spheres. There was no significant difference between the bed velocities on visual evaluation.

Conclusion

The quantitative accuracy and image quality achieved with WBDCBM-PET was comparable to that achieved with non-dynamic CBM, regardless of the pass number and bed velocity used during imaging for a given acquisition time.

http://bit.ly/2G2JvAQ